Adaptors & Sleeves - Arc Euro Trade

Morse Taper Straight Sockets - For Tang Type Tooling

Code	Outside Diameter	Morse Taper
120-010-00030	3/4in	MT1
120-010-00031	1in	MT1
120-010-00032	1in	MT2

120-010-00030	Morse Taper Straight Socket 3/4"dia - MT1 - Tang	£7.25	In Stock
120-010-00031	Morse Taper Straight Socket 1"dia - MT1 - Tang	£7.25	In Stock
120-010-00032	Morse Taper Straight Socket 1"dia - MT2 - Tang	£8.00	Out of Stock	Estimated Back in Stock date: To be advised Notify me when this item is available

Morse Taper Sleeves - Open for Drawbar use

Code	Outside Taper	Inside Taper
120-010-00100	MT2	MT1
120-010-00200	MT3	MT1
120-010-00300	MT3	MT2
120-010-00320	MT4	MT2
120-010-00340	MT4	MT3

120-010-00100	Morse Taper Sleeve 2 to 1 - Open	£3.30	In Stock
120-010-00200	Morse Taper Sleeve 3 to 1 - Open	£3.30	In Stock
120-010-00300	Morse Taper Sleeve 3 to 2 - Open	£3.30	In Stock
120-010-00320	Morse Taper Sleeve 4 to 2 - Open	£5.45	In Stock
120-010-00340	Morse Taper Sleeve 4 to 3 - Open	£5.45	In Stock

Morse Taper Adaptors - Tang

Code	Outside Taper	Inside Taper
120-010-00600	MT1	MT0
120-010-00700	MT2	MT1
120-010-00800	MT3	MT1
120-010-00900	MT3	MT2
120-010-01000	MT4	MT2
120-010-01100	MT4	MT3

120-010-00600	Morse Taper Adapter 1 to 0 - Tang	£3.30	In Stock
120-010-00700	Morse Taper Adapter 2 to 1 - Tang	£3.30	In Stock
120-010-00800	Morse Taper Adapter 3 to 1 - Tang	£3.30	In Stock
120-010-00900	Morse Taper Adapter 3 to 2 - Tang	£3.30	Out of Stock	Estimated Back in Stock date: To be advised Notify me when this item is available
120-010-01000	Morse Taper Adaptor 4 to 2 - Tang	£5.45	In Stock
120-010-01100	Morse Taper Adaptor 4 to 3 - Tang	£5.45	In Stock

R8 - Morse Taper Converter - Open for Drawbar Use

This converter is for use with Morse Taper tools with a drawbar thread e.g. M10, M12 or 3/8" Whit. It is NOT suitable for use with Tang type equipment.

The converter itself has a 7/16" UNF drawbar thread which is not normally required and must be bored out clear M12 drawbars. M10 and 3/8" Whit. drawbars will pass through the converter without modification.

Code	Taper
120-010-00400	R8 to MT2
120-010-00500	R8 to MT3

120-010-00400	R8 - MT2 Converter - Open	£9.50	Out of Stock	Estimated Back in Stock date: To be advised Notify me when this item is available
120-010-00500	R8 - MT3 Converter - Open	£9.50	In Stock

R8 - Morse Taper Converter - For Tang Tooling

This converter has a 7/16" UNF drawbar thread and is designed for use with Morse Taper tools with a tang.

Code	Taper
120-010-00520	R8 to MT2
120-010-00540	R8 to MT3

120-010-00520	R8 - MT2 Converter - Open (FOR TANG)	£9.50	In Stock
120-010-00540	R8 - MT3 Converter - Open (FOR TANG)	£9.50	In Stock