Clearance Items

No Image

Clearance Bearings

No Image
B105 B105 Drawn-Cup Needle Roller Bearing (Full needle race) 5/8x13/16x5/16" - Reduced to Clear £3.60 In Stock View Basket
640REPEAT-2RS 640 REPEAT - 2RS Thin Section Ball Bearing - 6 1/2"x7 1/4"x1/2" - Reduced to Clear £15.00 In Stock View Basket
O4 O 4 (LT 1/2 B) Thrust Ball Bearings - 1/2x1 9/32x5/8 - To Clear £4.96 In Stock View Basket

Diamond Hand Pads - Half Price to Clear!!

Diamond-Foam-Block

Hand grinding and polishing (with or without water) of granite, marble, glass, composites, concrete, soft stone, terrazzo, gemstone, ceramics, porcelain etc.

Code Grit Colour
070-030-10050 #50 Green
070-030-10100 #100 Black
070-030-10200 #200 Red
070-030-10400 #400 Yellow
070-030-10600 #600 White
070-030-11000 #1000 Blue
070-030-10000 6pc Set
070-030-10050 Diamond Pad on Foam Block - Green #50 £4.00 Out of Stock
Estimated Back in Stock date: To be advised
Notify me when this item is available
070-030-10100 Diamond Pad on Foam Block - Black #100 £4.00 In Stock View Basket
070-030-10200 Diamond Pad on Foam Block - Red #200 £4.00 In Stock View Basket
070-030-10400 Diamond Pad on Foam Block - Yellow #400 £4.00 In Stock View Basket
070-030-10600 Diamond Pad on Foam Block - White #600 £4.00 In Stock View Basket
070-030-11000 Diamond Pad on Foam Block - Blue #1000 £4.00 In Stock View Basket
070-030-10000 Diamond Pad on Foam Block - Set of 6pcs £20.00 Out of Stock
Estimated Back in Stock date: To be advised
Notify me when this item is available

Restore Pre-Clean Degreaser

Restore-Pre-Clean
  • Powerful water-soluble formulation removes mineral oils and greases from tools, machinery and vehicles. Degreasing should always precede de-rusting with Restore Rust Remover.
  • Biodegradable, non-toxic, water-based formulation removes grease, oil and grime and brightens all metal surfaces. It is harmless to plastics, rubbers, and copper based alloys. It should not be used on aluminium alloys.
  • A powerful corrosion inhibitor is included in the formulation to protect cleaned surfaces against further corrosion.
  • Extremely economical, the contents of a 500ml bottle makes up to 10 litres of powerful degreasing fluid which can be used either cold or hot.

This outstanding product can be used by a diverse range of different users, from restorers of all type of vehicle, tool collectors and restorers, boat builders, model engineers and conservators etc.

The degreasing solution is simply made by mixing the contents of the 500ml bottle with plain tap water in a polythene or stainless steel container. For heavy contamination:- add 2.5 litres of water to 500ml of Pre-Clean. For light contamination:- add 9.5 litres of water to 500ml of Pre-Clean.

If using a stainless steel tank, the solution may be heated to approximately 60 deg.C . This will significantly improve the cleaning process.

Parts may now be de-rusted using Restore Rust Remover, plated, painted, polished or, alternatively, protected against further corrosion using MetalGuard Ultra, ToolGuard VCI or ProtecTool Wax.

170-100-00250 Restore Pre-Clean Degreaser 250ml - Special Offer (16% Off) £10.50 In Stock View Basket
170-100-00300 Restore Pre-Clean Degreaser 500ml - Special Offer (18% Off) £16.50 In Stock View Basket

ProtecTool Wax Polish

ProtectTool
  • ProtecTool wax polish is a soft-paste wax designed specifically to protect steel and iron tools and machinery from corrosion. Unlike ordinary wax polishes, which, at best, can only offer barrier protection, ProtecTool contains a unique blend of powerful contact corrosion inhibitors suspended in the highly refined microcrystalline wax carrier.
  • ProtecTool can be buffed to a sheen producing a low friction surface which eases the passage of wood over machine tables, and significantly reduces the effort required when hand planning.
  • ProtecTool can also be used to slow down the tarnishing of polished copper, brass and bronze items.

ProtecTool does not contain silicone.

ProtecTool wax polish has been used and widely recommended by a diverse range of tool and machinery users.

Suggested uses include the protection of woodworking machine tables, reducing friction and protecting hand planes. Protection of heirloom quality tools and display items. Protecting woodworking lathe beds from the corrosive effect of wood shavings and damp. Prevents finger marking of vulnerable surfaces. Protect brass and copperware from tarnishing. Protection of antique artefacts, including steel arms and armour.

170-100-00650 ProtecTool Wax Polish 100ml - Special Offer (12% Off) £6.99 In Stock View Basket

Sanding Drums

MD-Sanding-Drums-1
110-010-01300 No.10 - 6x3/16" Sanding Drums+Threaded Mandrel 1/8" Shank £0.50 In Stock View Basket

Polishing Mops

MD-Polishing-Bobbins-1
110-010-01700 No.14 - 7x Assorted Felt Polishing Wheels+Arbor 1/8" Shank £0.50 In Stock View Basket

Wire Brushes

MD-Wire-Brushes-2
110-010-02100 No.18 - 3x Steel Wire Brushes 1/8" Shank £0.76 In Stock View Basket
110-010-02200 No.19 - 3x Brass Wire Brushes 1/8" Shank £0.76 In Stock View Basket

Dial Gauge 0-0.5x0.0005" Clearance Offer

Dial-Gauge

Clearance Price!

Code Size
100-100-00700 Imperial 0-0.5" x0.0005" increments
100-100-00700 Dial Gauge 0-0.5x0.0005" Clearance Offer £15.00 In Stock View Basket