5C Fixtures - Arc Euro Trade

5C Collet Fixture Type B

For Horizontal or Vertical use.

Screwed Ring Closure.

050-070-00100

5C Collet Fixture Type B

£33.00

In Stock

5C Collet Fixture Type C

For Horizontal or Vertical use.

Quick Action Lever Closure.

050-070-00200

5C Collet Fixture Type C

£33.00

In Stock

5C Collet Block Set

Square and Hexagonal blocks.

Lever Closure or Screwed Ring where space is limited.

050-070-00300

5C Collet Block Set

£31.50

In Stock

5C Collet Chuck

125mm diameter

Key Operated, Recessed Mount.

Backplate register = 95mm dia. 3.5mm deep

050-070-00400

5C Collet Chuck

£122.00

Out of Stock

Estimated Back in Stock date: To be advised
Notify me when this item is available

5C to ER32 Collet Adaptor

This clever little adaptor will enable you to use ER32 collets in your existing 5C fixtures. The adaptor has 5C standard 1.05" x 24tpi internal, and 1.230" x 20tpi external drawbar threads and a 1" internal bore up to the back of the ER32 taper. Because the adaptor has a collet chuck on the nose, it can only be locked into drawbar type fixtures such as:

5C Collet Fixture Type C.
5C Collet Block Set.
5C Indexing Heads not already fitted with an ER32 nut and adaptor.

Also compatible with our 5C Collet Adjustable Backstop. The adaptor is not suitable for front locking fixtures like our 5C Collet Fixture Type B.
The adaptor is not required for Stevenson's 5C Indexing Head with ER32 Nut and Adaptor.

050-070-00800

5C to ER32 Collet Adaptor

£32.50

In Stock

Stevenson's 5C Indexing Head with ER32 Nut and Adaptor

This 5C spin indexing head will accept both 5C and ER32 collets - handy when you consider that each ER collet has a wider operating range than a 5C collet.

The added versatility is made possible by the addition of a removeable 5C-ER32 collet adaptor and a special ER32 collet nut which is threaded onto the spindle nose.

Specifications:

Spindle Centre Height: 70mm
Min. Indexing Angle: 1°
Indexing Accuracy: ± 4'
Parallelism of Centre Line to Base: 0.02mm
Radial Run-out of Spindle: 0.02mm
Overall Dimensions: 255x128x134mm

050-070-00500

Stevenson's 5C Indexing Head with ER32 Nut and Adaptor

£65.00

Out of Stock

New stock due in: 18/11/2011
Notify me when this item is available

Tailstock for 5C Indexing Head

050-070-00600

Tailstock for 5C Indexing Head

£31.00

In Stock

5C Indexing Head and Tailstock Set

050-070-00700

5C Indexing Head and Tailstock Set

£84.00

Out of Stock

Estimated Back in Stock date: To be advised
Notify me when this item is available

5C Collet Adjustable Backstop

Designed to fit any 5C collet with a 1.05" x 24TPI internal thread

The 11mm diameter stop can be fixed from either end to give a good depth range of 0-3".

050-070-00049

5C Collet Adjustable Backstop

£7.80

In Stock

5C Universal Collet Adjustable Backstop

Designed to fit any 1" bore 5C collet with or without internal threads. The rear hex head screw operates 6 small axially oriented pins forcing 2 split rings to lock onto the internal bore of the collet. (Warning: Don't undo this screw too far else the pins drop out and disappear into the cracks in the floor!!)

Supplied with 2x fixed and 2x adjustable spring loaded stops (range 0-1").

050-070-00050

5C Universal Collet Adjustable Backstop

£13.50

In Stock