X3 Small Mill Spares

Although we don't stock a complete inventory of spare parts, we do normally carry the parts that you are likely to break or wear out.

You should be able to identify the part you need using the manual that came with the machine.

If you can't find your manual, click here to open an exploded diagram and a parts list of the machine (648kb).
(You will need Adobe Acrobat Reader to view this file)

X3 Mill Spares

Manufacturers description is shown in brackets

X3-6	X3 #6 Under Oil Seal 1	£6.00	In Stock
X3-9	X3 #9 Under Oil Seal 2	£5.00	In Stock
X3-38	X3 #38 Em-Stop Enclosure (Motor Enclosure)	£5.00	In Stock
X3-43	X3 #43 Recoil Spring (Clockwork Spring)	£7.50	In Stock
X3-63	X3 #63 Adjust Screw	£1.00	In Stock
X3-64	X3 #64 Gib Strip (Wedge)	£8.00	In Stock
X3-94	X3 #94 Internal Circlip (Check Ring 62)	£1.00	In Stock
X3-95	X3 #95 External Circlip (Check Ring 35)	£1.00	In Stock
X3-98	X3 #98 Key 8x20	£0.50	In Stock
X3-99	X3 #99 Key 4x25	£0.50	In Stock
X3-100	X3 #100 Key 5x40	£0.50	In Stock
X3-103	X3 #103 Key 4x16	£0.50	In Stock
X3-105	X3 #105 External Circlip (Check Ring)	£1.00	In Stock
X3-108	X3 #108 External Circlip (Check Ring 10)	£1.00	In Stock
X3-109	X3 #109 Key 3x16	£0.50	In Stock
X3-112	X3 #112 External Circlip (Check Ring)	£1.00	In Stock
X3-114	X3 #114 External Circlip (Check Ring 16)	£1.00	In Stock
X3-154	X3 #154 Long Gas Strut (Cushioning Cylinder)	£25.00	In Stock
X3-163M	X3 #163 X-Axis Screw Nut Metric	£15.00	In Stock
X3-163I	X3 #163 X-Axis Screw Nut Imperial	£15.00	In Stock
X3-164M	X3 #164 Y-Axis Screw Nut Metric	£15.00	In Stock
X3-164I	X3 #164 Y-Axis Screw Nut Imperial	£15.00	In Stock
X3-209	X3 #209 Microswitch	£10.00	In Stock
X3-217	X3 #217 Speed Potentiometer with Switch	£6.96	In Stock
X3-218	X3 #218 Emergency Stop Switch	£5.50	In Stock
X3-219	X3 #219 Reverse/Off/Forward Switch	£6.00	In Stock
X3-224	X3 #224 Motor	£145.00	In Stock
X3-BRUSHES	X3 Motor Brushes 12x6mm for older X3 motors (Pair)	£3.76	In Stock
X3-BRUSHES-2	X3 Motor Brushes 10x3.35mm for newer X3 Motors (Pair)	£3.76	In Stock
X3-226	X3 #226 Power Switch	£12.00	In Stock
X3-GUARD	X3 Chuck Guard with auto power off	£28.00	In Stock
X3-PCB	X3 PC Board	£150.00	In Stock
090-050-00402	X3 MT3 Drawbar 3/8" Whit Thread	£9.95	In Stock
090-050-00401	X3 MT3 Drawbar M12 Thread	£9.95	In Stock
090-050-00403	X3 R8 Drawbar 7/16" UNF Thread	£9.95	In Stock

Timing Belt Pulleys

NOTE: These pulleys are only suitable for use with the OLD Style timing belts - Please see timing belts below for correct identification.

X3-28	X3 #28 Spindle Pulley Flange (Up Press Loop)(OLD Style)	£1.00	In Stock
X3-29	X3 #29 Spindle Pulley (Big Timing Pulley)(OLD Style)	£10.00	In Stock
X3-30	X3 #30 Spindle Pulley Flange (Under Press Loop)(OLD Style)	£1.00	In Stock
X3-39	X3 #39 Motor Pulley Flange (Under Press Loop)(OLD Style)	£1.50	In Stock
X3-40	X3 #40 Motor Pulley (OLD Style)	£5.00	In Stock
X3-41	X3 #41 Motor Pulley Flange (Up Press Loop)(OLD Style)	£4.00	In Stock

X3 Timing Belts

Two types of timing belt have been fitted to the X3 Mill:

Old Style Belts can be identified by:

Flat profile teeth
Pitch: 1/4"
May be marked 2x65

New Style Belts can be identified by:

Deeper, rounded teeth
Pitch: 5mm
May be marked 5M400

X3-75	X3 #75 Timing Belt - Old Style	£5.00	In Stock
X3-75-2	X3 #75 Timing Belt - New Style	£5.00	In Stock