C1 Lathe Accessories

I-Machines-C1-Lathe

C1 Tailstock Chuck & Shank MT1-10mm

C1-Tailstock-Chuck
090-010-00800 C1 Tailstock Chuck & Shank MT1-10mm £13.15 In Stock View Basket

C1 Tool Holder Set

C1-Tool-Holder-Set

10mm Parting Blade Holder and Boring Bar Holder

060-320-00300 C1 Tool Holder Set £20.95 In Stock View Basket

C1 Parting-off Blade

C1_Parting_Off_Blade

Size 10x2x74mm

Fits C1 Tool Holder set and C1 Quick Change Tool Post

060-320-00500 C1 Parting-off Blade £4.00 In Stock View Basket

C1 Tools Set - Parting-off Blade + Boring Bar

C1-Tool-Set

To fit C1 Tool Holder Set

060-320-00400 C1 Tools Set - Parting-off Blade + Boring Bar £9.00 In Stock View Basket

C1 Boring Bar

C1_Boring_Bar

Size: ø10x88mm

060-320-00600 C1 Boring Bar £5.50 In Stock View Basket

8mm Parting Off Tool with Parting Blade

8mm-Parting-Off-Tool

Suitable for C0, C1, C3 and many other lathes

060-320-00920 8mm Parting Off Tool with Parting Blade £11.00 In Stock View Basket

Parting Blade for 8mm Holder

8mm-Parting-Blade

1.5 x 8.3 x 70mm

060-320-00940 Parting Blade for 8mm Holder £4.40 In Stock View Basket

Carbide Tipped 11pc Lathe Tool Set - 8x8mm

Lathe-Tool-Set-8x8

Brazed Carbide Tips - For General Purpose Use

060-320-00200 Carbide Tipped 11pc Lathe Tool Set - 8x8mm £24.80 In Stock View Basket

C1 Imperial Thread Cutting Gears

C1-Thread-Cutting-Gears

Gears included: 36, 40, 42, 45, 48, 50, 54, 57 and 60 Teeth

If you are using a Metric machine (with a Metric leadscrew), the Imperial gear set will not help you cut accurate Imperial pitch threads. However, it is possible to arrive at a close approximation for some pitches that may be suitable depending on the degree of accuracy required.

Click here to read more about Imperial thread cutting on a metric C1 Lathe

090-010-00100 C1 Imperial Thread Cutting Gears £7.80 In Stock View Basket

C1 Metric Threading Cutting Gears

C1-Thread-Cutting-Gears

Gears included: 40, 42, 45, 48, 50, 54, 60 Teeth

090-010-00200 C1 Metric Threading Cutting Gears £7.80 In Stock View Basket

C1 Fixed Steady

C1-Fixed-Steady
090-010-00300 C1 Fixed Steady £22.80 Out of Stock
 		Estimated Back in Stock date: To be advised
Notify me when this item is available

C1 Travelling Steady

C1-Travelling-Steady
090-010-00400 C1 Travelling Steady £16.80 In Stock View Basket

C1 Face Plate 112mm

C1-Face-Plate
090-010-00500 C1 Face Plate 112mm £22.80 In Stock View Basket

C1 Face Plate Clamping Set

C1-Faceplate-Clamping-Set
090-010-00501 C1 Face Plate Clamping Set £15.60 In Stock View Basket

C1 Horizontal Slide (Top Slide)

C1-Horizontal-Slide
090-010-00600 C1 Horizontal Slide (Top Slide) £90.00 In Stock View Basket

C1 Quick Change Tool Post Set / 4 holders

C1-QCTP

Supplied with 4 holders Including:

  • 2x Standard
  • 1x Standard/Vee
  • 1x 3/8” Parting Blade Holder (shown attached to the tool post in the picture above)

This toolpost is made for Sieg C1 Lathe but check dimensions for other lathes.

Dimensions (mm) A B C D H w h
C1 Quick Change Tool Post Drawing 53 35 64 8 20
to
38		 9.5 11
090-010-00550 C1 Quick Change Tool Post Set / 4 holders £60.00 In Stock View Basket

C1 Quick Change Tool Post Extra Holder

C1-QCTP-Spare-Holder
090-010-00551 C1 Quick Change Tool Post Extra Holder £13.20 In Stock View Basket

C1 Vertical Slide

C1-Vertical-Slide

Ideal as a milling attachment for our C1 or similar lathes but also has many other uses.

8mm T-slots accept standard M6 T-Nuts.
Fixing via 4x 6mm screws on 50x40mm centres
(4 fixing screws and T-nuts are included)

090-010-00700 C1 Vertical Slide £85.20 In Stock View Basket

T-Nuts M6x8mm Slot - Pack of 2 Nuts

Clamping-T-Nuts
130-011-00100 T-Nuts M6x8mm Slot - Pack of 2 Nuts £1.90 In Stock View Basket

C1 Radius Turning Attachment

C1-Ball-Cutting-Set
090-010-00900 C1 Radius Turning Attachment £33.60 In Stock View Basket

C1 Wood Tool Rest & Centre

C1-Woodturning-Kit
090-010-00450 C1 Wood Tool Rest & Centre £28.80 Out of Stock
 		Estimated Back in Stock date: To be advised
Notify me when this item is available

C1 Lathe Dog

C1-Dog
090-010-00590 C1 Lathe Dog £6.60 Out of Stock
 		Estimated Back in Stock date: To be advised
Notify me when this item is available

Stand for C1,C3,Z1,XO,Su.X1,X2

Stand

Steel frame with wooden top and pull-out shelf. Overall dims: 800x350x870mm

Please Note: We will only ship this item if purchased with a machine (excluding X0) Alternatively, it may be collected from our warehouse or at shows

090-010-01100 Stand for C1,C3,Z1,XO,Su.X1,X2 £50.40 In Stock View Basket
Whilst every effort has been made to make the information and prices correct we cannot
accept any responsibility for inaccuracies. Errors & Omissions Excepted.
Copyright © 2012, Arc Euro Trade Ltd. All Rights Reserved.