Milling Accessories

I-Machines-Milling-Acc

Micro Drill Adaptor - JT0 - 1/2" Shank

Micro-Drill-Adaptor

The Micro Drill Adaptor is like a miniature quill and is designed for drilling small holes using a lathe, mill or pillar drill.

How it Works

The shank has an internal, spring return, sliding spindle keyed to it with a JT0 taper to which a small drill chuck is fitted.

A knurled ring is mounted to the spindle via a bearing and is used to manually feed the spindle even when the adaptor is rotating at high speed.

  • Sensitive fingertip control.
  • Helps prevent drill breakage.
  • Accurate drilling of small holes with large machines.
  • 1/2" straight shank.
  • JT0 chuck taper. (Suits our 0.4-4mm key-type drill chuck 040-010-00100)

(Chuck not included)

040-015-00400 Micro Drill Adaptor - JT0 - 1/2" Shank £13.12 In Stock Qty:
040-010-00100 Key Type Engineering Drill Chuck 0.4-4mm JT0 Taper £12.46 In Stock Qty:

Cast Iron Work Table 200x90mm

090-060-00200-XY-Table-200x90mm-2014
Longtitudinal (X) Travel 130mm
Cross (Y) Travel 70mm
T-Slot Size 8mm
Handwheel Divisions
(resettable micrometer dials)
50 divisions x 0.02mm
Table Size 200x90mm
Useable Table Size 200x90mm
Base Size 100x175mm
Height 72mm
Weight (net/gross) 5.4kg/5.5kg

Supplied with 2x 8mm (M6) T-Nuts

Important Note:
X/Y tables are covered in transport grease.
They should be thoroughly cleaned, adjusted and lubricated before use.

090-060-00200 Cast Iron Work Table 200x90mm (Metric) £108.20 In Stock Qty:

Cast Iron Work Table 240x145mm

XY-Worktable-240x145
Longtitudinal (X) Travel 200mm
Cross (Y) Travel 100mm
T-Slot Size 8mm
Table Size 240x145mm
Useable Table Size 240x145mm
Base Size 240x265mm
Height 122mm
Weight (net/gross) 28kg/35kg

Important Note:

X/Y tables are covered in transport grease.
They should be thoroughly cleaned, adjusted and lubricated before use.

090-060-00700 Cast Iron Work Table 240x145mm (Metric) £147.82 In Stock Qty:

Cast Iron Worktable 400x145mm

Super-X1L-Worktable

Similar to the worktable of our Super X1L Mill (long table)

Longtitudinal (X) Travel 330mm
Cross (Y) Travel 145mm
T-Slot Size 8mm
Table Size 400x145mm
Useable Table Size 400x145mm
Base Size 216x355mm
Height 122mm
Weight (gross) 30kg

Important Note:

X/Y tables are covered in transport grease.
They should be thoroughly cleaned, adjusted and lubricated before use.

090-060-00900 SX1L Cast Iron Work Table 400x145mm (Imperial) £191.56 In Stock Qty:
090-060-01000 SX1L Cast Iron Work Table 400x145mm (Metric) £191.56 In Stock Qty:

4" Rotary Table and Accessories

Rotary-Table-Combi-Set-4in

4" Rotary Table comes complete with Chuck Backplate (for Chinese 80mm 3 jaw or 4 jaw chuck or 95mm ER25 or ER32 lathe collet chuck), 2 Hold-down Clamps and 4 T-Nuts.

Rotary Table Combi Set also includes Tailstock and Dividing Plate Set.

May be used horizontally or vertically.

Table Diameter 100mm
Length 140mm
Width (excl. h/wheel) 126mm
Height 73mm
Bore Taper MT2
T-Slot Width 8mm
Locating Key Width
(to fit milling table T-slot
when mounted vertically)
10mm
Centre Height
(Mounted Vertically)
68mm
Gear Ratio 1:72
Handwheel Divisions 2'
Min. Vernier reading 10"
Chuck Backplate
Register
55mm
Dividing Plate
Divisions
6 - 1080

Cletus Berkeley has written a useful guide on how to use a rotary table including 'basic' gear cutting.
Download the Guide
(1.7Mb).
(Adobe Acrobat Reader required)

130-030-00097 4" Rotary Table £206.18 In Stock Qty:
130-030-00099 Tailstock for 4" Rotary Table £46.33 In Stock Qty:
130-030-00098 Dividing Plate Set for 4" Rotary Table £45.82 In Stock Qty:
130-030-00100 4" Rotary Table Combi Set £297.82 In Stock Qty:
040-040-00100 Lathe Chuck Std. 3-Jaw Self Centring 80mm £64.70 In Stock Qty:
040-040-01000 Lathe Chuck 4 Jaw Self Centering 80mm £78.65 In Stock Qty:
040-040-00500 Lathe Chuck 4-Jaw Independent 80mm £64.70 In Stock Qty:
050-110-25610 ER25 Lathe Collet Chuck - 95mm Dia £40.96 In Stock Qty:
050-110-32600 ER32 Lathe Collet Chuck - 95mm Dia £40.44 In Stock Qty:

6" Rotary Table and Accessories

Rotary-Table-Combi-Set-6in-2

6" Rotary Table comes complete with Chuck Backplate (for Chinese 125mm 3 jaw or 4 jaw chuck, or 125mm ER32 lathe collet chuck), 2 Hold-down Clamps and 4 T-Nuts

Rotary Table Combi Set also includes Tailstock and Dividing Plate Set.

May be used horizontally or vertically.

Table Diameter 150mm
Length 178mm
Width (excl. h/wheel) 176mm
Height 90mm
Bore Taper MT2
T-Slot Width 10mm
Locating Key Width
(to fit milling table T-slot
when mounted vertically)
12mm
Centre Height
(Mounted Vertically)
98mm
Gear Ratio 1:72
Handwheel Divisions 2'
Min. Vernier reading 10"
Chuck Backplate
Register
95mm
Dividing Plate
Divisions
6 - 1080
130-030-00127 6" Rotary Table £310.32 In Stock Qty:
130-030-00129 Tailstock for 6" Rotary Table £81.64 In Stock Qty:
130-030-00128 Dividing Plate Set for 6" Rotary Table £79.87 In Stock Qty:
130-030-00130 6" Rotary Table Combi Set £464.45 In Stock Qty:
040-040-00300 Lathe Chuck Std. 3-Jaw Self Centring 125mm £77.86 In Stock Qty:
040-040-01050 Lathe Chuck 4 Jaw Self Centering 125mm £122.88 In Stock Qty:
040-040-00700 Lathe Chuck 4 Jaw Independent 125mm £84.92 In Stock Qty:
050-110-32650 ER32 Lathe Collet Chuck - 125mm Dia £44.80 In Stock Qty:

4" Rotary Table with Stepper Motor

Rotary-Table-and-Stepper

This is our standard 4in Rotary Table fitted with one of our 180Ncm Hybrid Stepper Motors.

  • The motor is wired with a robust 4 way XLR plug, ready to connect straight to the 4th axis socket of a KX1 or KX3 CNC machine, into a DivisionMaster Indexing Controller or connected to a bipolar stepper drive and used as a fourth axis on your CNC system.
    (Compatible XLR chassis socket: 160-030-00225)
  • The worm is fitted with Needle Roller Thrust Bearings to minimize backlash and may be adjusted for wear in the future.
  • Complete with Chuck Backplate for a Chinese 80mm 3 jaw or 4 jaw chuck or 95mm ER25 or ER32 lathe collet chuck, 2 Hold-down Clamps and 4 T-Nuts.
  • May be used horizontally or vertically.
Table Diameter 100mm
Length 140mm
Width (excl. h/wheel) 126mm
Height 73mm
Bore Taper MT2
T-Slot Width 8mm
Locating Key Width 8mm or 10mm
Centre Height
(Mounted Vertically)
68mm
Gear Ratio 1:72
Handwheel Divisions N/A
Min. Vernier reading N/A
Chuck Backplate
Register
55mm
130-030-00300 4" Rotary Table with Stepper Motor £343.64 In Stock Qty:
160-030-00225 4 Way XLR Chassis Socket - Nickel Plated £4.69 In Stock Qty:
040-040-00100 Lathe Chuck Std. 3-Jaw Self Centring 80mm £64.70 In Stock Qty:
040-040-01000 Lathe Chuck 4 Jaw Self Centering 80mm £78.65 In Stock Qty:
040-040-00500 Lathe Chuck 4-Jaw Independent 80mm £64.70 In Stock Qty:
050-110-25610 ER25 Lathe Collet Chuck - 95mm Dia £40.96 In Stock Qty:
050-110-32600 ER32 Lathe Collet Chuck - 95mm Dia £40.44 In Stock Qty:

6" Rotary Table with Stepper Motor

Rotary-Table-and-Stepper-6in

This is our standard 6in Rotary Table fitted with one of our 180Ncm Hybrid Stepper Motors.

  • The motor is wired with a robust 4 way XLR plug, ready to connect straight to the 4th axis socket of a KX1 or KX3 CNC machine, into a DivisionMaster Indexing Controller or connected to a bipolar stepper drive and used as a fourth axis on your CNC system.
    (Compatible XLR chassis socket: 160-030-00225)
  • The worm is fitted with Needle Roller Thrust Bearings to minimize backlash and may be adjusted for wear in the future.
  • Complete with Chuck Backplate for a Chinese 125mm 3 jaw or 4 jaw chuck or 125mm ER32 lathe collet chuck, 2 Hold-down Clamps and 4 T-Nuts
  • May be used horizontally or vertically.
Table Diameter 150mm
Length 178mm
Width (excl. h/wheel) 176mm
Height 90mm
Bore Taper MT2
T-Slot Width 10mm
Locating Key Width 8mm or 10mm
Centre Height
(Mounted Vertically)
98mm
Gear Ratio 1:72
Handwheel Divisions N/A
Min. Vernier reading N/A
Chuck Backplate
Register
95mm
130-030-00400 6" Rotary Table with Stepper Motor £505.50 In Stock Qty:
160-030-00225 4 Way XLR Chassis Socket - Nickel Plated £4.69 In Stock Qty:
040-040-00300 Lathe Chuck Std. 3-Jaw Self Centring 125mm £77.86 In Stock Qty:
040-040-01050 Lathe Chuck 4 Jaw Self Centering 125mm £122.88 In Stock Qty:
040-040-00700 Lathe Chuck 4 Jaw Independent 125mm £84.92 In Stock Qty:
050-110-32650 ER32 Lathe Collet Chuck - 125mm Dia £44.80 In Stock Qty:

16 Litre Coolant System

Coolant-System-16-Litre

Self-contained coolant system with enclosed steel tank, pump, feed & return hoses and convenient carrying handles.

The Loc-line type spout has a magnetic base for easy attachment to the machine and a flow valve.

A No Voltage Release (NVR) switch is incorporated so the pump will not automatically restart when power is restored after a power cut.

  • Capacity: 16 litres
  • Voltage: 230V
  • Power: 40W
  • Tank Dimensions: 280x260x220mm
  • Overall dimensions: 310x265x360mm
090-080-00090 16 Litre Coolant System £140.63 In Stock Qty:

27 Litre Coolant System

Coolant-System-27-Litre

Self-contained coolant system with enclosed steel tank, pump, feed & return hoses and convenient carrying handles.

The Loc-line type spout has a magnetic base for easy attachment to the machine and a flow valve.

A No Voltage Release (NVR) switch is incorporated so the pump will not automatically restart when power is restored after a power cut.

  • Capacity: 27 litres
  • Voltage: 230V
  • Power: 40W
  • Tank Dimensions: 500x300x185mm
  • Overall dimensions: 540x300x375mm
090-080-00100 27 Litre Coolant System £151.00 In Stock Qty:

Magnetic Coolant Base - 1 Way

Mag-Coolant-Base-1-Way

10kg pull magnetic base with keeper.

1x inlet with hose connector, 1x 1/4" BSP outlet.

090-080-10100 Magnetic Coolant Base - 1 Way £8.45 In Stock Qty:

Magnetic Coolant Base (C) - 2 Way

090-080-10200-Magnetic-Coolant-Base-(C)---2-Way

10kg pull magnetic base with keeper.

1x inlet with hose connector, 2x 1/4" BSP outlets.

090-080-10200 Magnetic Coolant Base (C) - 2 Way £8.45 In Stock Qty:

Magnetic Coolant Base - 3 Way

Magnetic-Coolant-Base-3-Way

10kg pull magnetic base with keeper

1x inlet with hose connector, 3x 1/4" BSP outlets.

090-080-10103 Magnetic Coolant Base - 3 Way £8.96 In Stock Qty:

Switched Magnetic Coolant Base (D) - 2 Way

Mag-C-Base-2-Way-Sw

60kg pull switched magnetic base.

1x inlet with hose connector, 2x 1/4" BSP outlet and 1x blanking plug.

090-080-10300 Switched Magnetic Coolant Base (D) - 2 Way £11.04 Out of Stock
Estimated Back in Stock date: To be advised
Click to be notified when in stock

350mm Coolant Hose - Round Spout - Plastic Tap - 1/4"BSP

Cool-Hose-Round-Spout2

Flexible coolant hose with round spout.

Plastic tap - threaded 1/4" BSP

090-080-10400 350mm Coolant Hose - Round Spout - Plastic Tap - 1/4"BSP £5.11 In Stock Qty:

350mm Coolant Hose - Flat Spout - Plastic Tap - 1/4"BSP

Coolant-Hose-Plastic-Tap-Flat-Spout

Flexible coolant hose with flat spout.

Plastic tap - threaded 1/4" BSP.

090-080-10500 350mm Coolant Hose - Flat Spout - Plastic Tap - 1/4"BSP £5.11 In Stock Qty:

Corrosion Resistant Plug with Nitrile O-Ring - 1/4"BSP

Corrosion-Resistant-Plug-3-8-BSP
090-080-10600 Corrosion Resistant Plug with Nitrile O-Ring - 1/4"BSP £2.08 In Stock Qty:

C6 Milling Table 240x110mm

130-020-00200-Milling-Table-240x110

Milling table dimensions

130-020-00200 C6 Milling Table 240x110mm £30.61 In Stock Qty:

Milling Table 230x120mm with Bottom Fixing Lugs

Milling-Table-230x120

Milling table drawing

130-020-00300 Milling Table 230x120mm with Bottom Fixing Lugs £25.72 In Stock Qty:

Stand for C1,C3,Z1,XO,Su.X1,X2

Stand

Steel frame with wooden top and pull-out shelf.

Overall dims: 800x350x870mm.

Please Note: We will only ship this item if purchased with a machine (excluding X0).
Alternatively, it may be collected from our warehouse.

090-010-01100 Stand for C1,C3,Z1,XO,Su.X1,X2 £52.48 In Stock Qty: