SIEG SX2 PLUS Mini Mill

I-Machines-Super-X2-Plus-Mill

NEW SIEG Super X2 PLUS Mini Mill

Super-X2Plus-Mill-1

Powerful, 500w Brushless DC Motor

  • Far better torque even at low speeds.
  • Quieter machine since spindle gearbox is no longer required.

Larger Worktable than standard X2 Mill

  • X2 worktable has always been smaller than our X1L so we have used the SX1L table!

Bigger Section Fixed Column

  • With a more powerful motor, we wanted extra rigidity so we scrapped the weaker tilting column and had a new stronger casting made that fixes directly to the base.

Exclusive to Arc Euro Trade

  • The Super X2 PLUS was designed by ARC and engineered by SIEG - you won't find it anywhere else.
  • The Old SIEG Model X2 Mini Mill is discontinued from our range.
Specifications
Drilling Capacity 13mm
End Milling Capacity 16mm
Face Milling Capacity 30mm
Throat 168mm
Spindle Taper Choice of MT3 or R8
Spindle to Table Distance 15-285mm
Spindle Speed (Variable) 100-2500 rpm ± 10%
Table Cross Travel 145mm
Table Longitudinal Travel 330mm
Table Size 400x145mm
Effective Table Size 400x145mm
T-Slot Size 8mm (M6 T-Nuts)
Motor Output 500w DC (Brushless Motor)
Overall
Dimensions		 Width 515mm
Depth 560mm
Height Top of Column: 595mm
Head Fully Extended: 750mm
Weight (Net/Gross) 60kg/71kg
Standard Equipment: 13mm Drill Chuck and Arbor, Drawbar

Carriage £40.00

Delivery: When the machine is ready, we will contact you to arrange a convenient day for delivery.

Overseas customers (including UK Islands) thinking of ordering a machine, please Read This first.

080-030-00300 Super X2-PLUS Mill - R8 Metric £585.00 In Stock View Basket
080-030-00305 Super X2-PLUS Mill - MT3 Metric - NEW £585.00 In Stock View Basket
080-030-00310 Super X2-PLUS Mill - MT3 Imperial £585.00 In Stock View Basket

Arc Preparation Service

Spanner_3

Fully Prepared Machines
These machines are stripped, de-greased, re-assembled, lubricated, adjusted and tested by our own skilled engineers. Only once a machine is fully prepared will it be passed for collection or delivery. This means you can start using the machine straight away, confident in the knowledge that the machine is fully operational. You are also welcome to visit our workshop to see your own machine being prepared.

Factory Assembled
These are the same machines only NO preparation work has been carried out by us. Upon delivery, we recommend that the machine be stripped, cleaned (including removing any casting dust or other contamination from inside the machine), adjusted, lubricated and tested before use. Only experienced engineers should undertake this work.

080-030-00320 Super X2-PLUS Mill Preparation £225.00 In Stock View Basket

Super X2 PLUS Digital Speed Display

C3-Super-Digital-Speed-Display-Grey
090-020-01500 Super C3 (and Super X2 Plus) Digital Speed Display £86.40 In Stock View Basket

Collet Starter Sets

Collet-Starter-Sets-R8-MT3
050-040-01701 4pc R8 Metric Round Collet Starter Set 6, 10, 12 & 16mm £30.80 In Stock View Basket
050-010-02601 4pc MT3 Imperial Collet Starter Set - 1/4", 3/8", 1/2", 5/8" £30.80 In Stock View Basket

ER32 Milling Collet Chuck Sets

ER32-Collet-Chuck-Set-MT2

Collets Included (nominal size-smallest size): 6-5mm, 8-7mm, 10-9mm, 12-11mm, 16-15mm, 20-19mm

050-110-32500 ER32/MT3 Milling Collet Chuck Set with 6 Collets(M12 Thread) £82.20 Out of Stock
 		Estimated Back in Stock date: To be advised
Notify me when this item is available
050-110-32510 ER32/R8 Milling Collet Chuck Set with 6 Collets (7/16" UNF) £82.20 In Stock View Basket

Radial Milling Vice 80mm

Radial-Milling-Vice-80mm-2010
80mm Radial
Milling Vice
Dimensions with Swivel Base
Jaw Width 80mm
Jaw Opening 60mm
Fixing Centres 130mm
Fixing Bolt Size 10mm
Location Keyway Width 14mm
Overall Swivel Base Size 155x102mm
Overall Height 94mm
Dimensions without Swivel Base
Fixing Centres 76mm
Fixing Holes 10mm
Overall Height 70mm
130-040-00900 Radial Milling Vice 80mm £67.00 In Stock View Basket

Precision Tool Vices

Vices-Precision-Tool-3-Small

Made from high quality alloy steel. Hardened and precision ground for parallelism and squareness to a high finish.

How it Works
  • The angled locking screw design completely eliminates jaw lift in these vices.
  • The locking screw pulls on a T-bar which is engaged in a rack machined into the body of the vice. (see below)
  • The rack allows the movable jaw to be re-positioned whilst keeping the locking screw at an optimum angle.
Code Size/Jaw
Width		 Jaw
Depth		 Jaw
Opening		 Overall
Length		 Height
130-040-01000 25mm 9mm 25mm 65mm 29mm
130-040-01100 50mm 25mm 65mm 140mm 50mm
130-040-01200 80mm 40mm 100mm 200mm 80mm
130-040-01000 Precision Tool Vice 25mm wide £23.00 In Stock View Basket
130-040-01100 Precision Tool Vice 50mm wide £47.30 In Stock View Basket
130-040-01200 Precision Tool Vice 80mm wide £67.00 In Stock View Basket

4" Rotary Table and Accessories

Rotary-Table-Combi-Set-4in

4" Rotary Table comes complete with Chuck Backplate (for 80mm 3 jaw or 4 jaw chuck), 2 Hold-down Clamps and 4 T-Nuts.

Rotary Table Combi Set also includes Tailstock and Dividing Plate Set.

May be used horizontally or vertically.

Table Diameter 100mm
Length 140mm
Width (excl. h/wheel) 126mm
Height 73mm
Bore Taper MT2
T-Slot Width 8mm
Locating Key Width
(to fit milling table T-slot
when mounted vertically)		 10mm
Centre Height
(Mounted Vertically)		 68mm
Gear Ratio 1:72
Handwheel Divisions 2'
Min. Vernier reading 10"
Chuck Backplate
Register		 55mm
Dividing Plate
Divisions		 6 - 1080

Cletus Berkeley has written a useful guide on how to use a rotary table including 'basic' gear cutting.
Download the Guide (1.7Mb).
(Adobe Acrobat Reader required)

130-030-00097 4" Rotary Table £198.00 In Stock View Basket
130-030-00099 Tailstock for 4" Rotary Table £44.50 In Stock View Basket
130-030-00098 Dividing Plate Set for 4" Rotary Table £44.00 In Stock View Basket
130-030-00100 4" Rotary Table Combi Set £286.00 In Stock View Basket
040-040-00100 Lathe Chuck Std. 3-Jaw Self Centring 80mm £64.00 In Stock View Basket
040-040-01000 Lathe Chuck 4 Jaw Self Centering 80mm £75.50 In Stock View Basket
040-040-00500 Lathe Chuck 4-Jaw Independent 80mm £64.00 In Stock View Basket

Super X1L Oil Tray

X1-Oil-Tray

Dimensions: 460x320mm

090-040-00100 Super X1L Oil Tray £27.95 In Stock View Basket

Tilting Vice 70mm

Tilting-Vice-70mm
Code Size
(Jaw Width)		 Jaw Depth Jaw opening Base Size Height
(no Tilt)
130-040-00400 70mm 20mm 60mm 145x102mm 60mm
130-040-00400 Tilting Vice 70mm £57.80 In Stock View Basket

24pc Clamping Set 8mm (M6 Thread)

24pc-Clamping-Kit-2009

For 8mm wide T-Slots

T-Nuts and studs are threaded M6

130-010-00100 24pc Clamping Set 8mm (M6 Thread) £28.90 In Stock View Basket

Stand for C1,C3,Z1,XO,Su.X1,X2

Stand

Steel frame with wooden top and pull-out shelf. Overall dims: 800x350x870mm

Please Note: We will only ship this item if purchased with a machine (excluding X0) Alternatively, it may be collected from our warehouse or at shows

090-010-01100 Stand for C1,C3,Z1,XO,Su.X1,X2 £50.40 In Stock View Basket
Whilst every effort has been made to make the information and prices correct we cannot
accept any responsibility for inaccuracies. Errors & Omissions Excepted.
Copyright © 2012, Arc Euro Trade Ltd. All Rights Reserved.