SIEG X0 Micro Mill

I-Machines-X0-Mill
Shortcuts
Machine Spares
Machine Diagram

SIEG X0 Digital Micro Mill - Belt Drive - Brushed Motor

X0-Mill-Cap
Specifications
Drilling Capacity 6mm
End Milling Capacity 6mm
Throat 165mm
Spindle to Table Distance 205mm
Quill Stroke 40mm
Spindle Taper JT1 (Male)
Spindle Speed
(Variable)
High Range 0-5000 rpm ±10%
Low Range 0-3600 rpm ±10%
Spindle Drive Polygroove Belt
Motor Output 150w
Input Voltage 220-240VAC 50/60Hz
Overall Dimensions 165x275x460mm
Weight (Net/Gross) 15kg/20kg
Standard Equipment:
6mm Drill Chuck and Chuck Guard

Carriage + £12.00

Exclaimation
  • This machine is sold for hobby use only.
  • We do not accept PayPal payments for machines.
  • Overseas customers (including UK Islands) thinking of ordering a machine, please Read This first.
080-030-00100 X0 Digital Micro Mill - Belt Drive - Brushed Motor £197.95 In Stock Qty:

Cast Iron Work Table 200x90mm

090-060-00200-XY-Table-200x90mm-2014
Longtitudinal (X) Travel 130mm
Cross (Y) Travel 70mm
T-Slot Size 8mm
Handwheel Divisions
(resettable micrometer dials)
50 divisions x 0.02mm
Table Size 200x90mm
Useable Table Size 200x90mm
Base Size 100x175mm
Height 72mm
Weight (net/gross) 5.4kg/5.5kg

Supplied with 2x 8mm (M6) T-Nuts

Important Note:
X/Y tables are covered in transport grease.
They should be thoroughly cleaned, adjusted and lubricated before use.

090-060-00200 Cast Iron Work Table 200x90mm (Metric) £108.20 In Stock Qty:

JT1-ER11 Milling Collet Chuck Set with 6 Collets

050-110-11500-ER11-Collet-Set-LN-2014

Highly accurate small size collet chuck set - fits Jacobs JT1 taper spindle

Choice of Metric or Imperial Collets:

Metric - 1, 2, 3, 4, 5, 6mm

Imperial - 3/64", 5/64", 1/8", 5/32", 3/16", 1/4"

050-110-11500 ER11 Collet Chuck Set - 16mm Shank/JT1 - 6 Metric Collets **LN £43.20 In Stock Qty:
050-110-11510 ER11 Collet Chuck Set - 16mm Shank/JT1 - 6 Imperial Collets **LN £43.20 In Stock Qty:

24pc Clamping Set 8mm (M6 Thread)

24pc-Clamping-Kit-2009

For 8mm wide T-Slots

T-Nuts and studs are threaded M6

130-010-00100 24pc Clamping Set 8mm (M6 Thread) £29.77 In Stock Qty:

JT1 Chuck Removal Wedges (Pair)

040-030-00105-Chuck-Removal-Wedges-JT1
040-030-00105 JT1 Chuck Removal Wedges (Pair) £5.00 In Stock Qty:

Stand for C1,C3,Z1,XO,Su.X1,X2

Stand

Steel frame with wooden top and pull-out shelf.

Overall dims: 800x350x870mm.

Please Note: We will only ship this item if purchased with a machine (excluding X0).
Alternatively, it may be collected from our warehouse.

090-010-01100 Stand for C1,C3,Z1,XO,Su.X1,X2 £51.91 In Stock Qty: