Truloc Engineering Grade Adhesives

TRULOC Superbond 500 Structural Acrylic Adhesive

NEW

In our opinion: Better, Safer, and more Cost Effective than the nearest Loctite equivalent 326!!

Two component structural acrylic adhesive cured by contact - does not require mixing.
No separate activator required.
Highly resistant to impact, peeling and tensile.
Suitable for bonding metals, ceramics, glass, wood, hard plastics.
(Nearest Loctite Equivalent: 326 only safer and probably better...)

Mixing Ratio	1:1 (Not critical)
Joint Thickness	0.05 to 0.5mm
Handling Time	1-3 minutes
Functional Strength	30-60 minutes
Functional Strength	30 to 60 minutes
Shear Strength	12-25 N.mm²
Tensile Strength	15-25 N.mm²
Peeling Strength	3.5-5 N.mm
Impact strength	15-25 Nmm/mm²
Pack Size	2x 50ml bottles
Download	Data Sheet

170-200-30100

Truloc Superbond 500 2 Pack Structural Acr.Bonder A/B 50ml

£17.20

In Stock

TRULOC Superset Engineering Grade Cyanoacrylate

NEW

These are high performance products comparable with Loctite engineering grades, not to be confused with cheaper industrial or budget alternatives.

Selection Guide	Superset 41	Superset 45	Superset 53	Superset 150	Superset GEL
Grade	Wicking Grade	Low Viscosity	Medium Viscosity	High Viscosity	Gel
Features	Very Low Viscosity. Rapid handling. High bond strength. (Loctite Equivalent 420)	Rapid handling strength. High bond strength. (Loctite Equivalent 495)	Rapid handling strength. Good weathering resistance. (Loctite Equivalent 424)	Good gap filling. High impact strength. Good for bonding porous materials. (Loctite Equivalent 415)	Suitable for vertical surfaces and highly porous materials. Rapid handling strength. High bond strength. (Loctite Equivalent 454)
Type	High speed. Very low viscosity	Low to medium viscosity for fast bonding of rubber, plastics and metals.	Medium viscosity adhesive for the bonding of rubbers and trims	High viscosity adhesive with gap filling ability	Gel consistency adhesive, ideal for vertical applications.
Description	Truloc Superset 41 is a high speed very low viscosity, ethyl based cyanoacrylate adhesive. Superset 41 is designed for the rapid bonding of plastics and rubbers and its low viscosity enables it to wick between close fitting parts and set within 5 seconds. This adhesives properties include rapid handling strength and high bond strength.	Truloc Superset 45 is a low viscosity, ethyl based cyanoacrylate adhesive. It has been designed for the rapid bonding of plastics and rubbers and metals. Its rapid handling strength and high bond strength makes it ideal for O-Ring bonding.	Truloc Superset 53 is a medium viscosity, ethyl based cyanoacrylate adhesive. Superset 53 is designed for the rapid bonding of plastics and rubbers. It features extremely fast fixturing times and good weathering resistance. It is ideal for bonding models and toys, emblems, plastic knobs and insulating trim.	Truloc Superset 150 features high viscosity (1500 cps), methyl based cyanoacrylate adhesive. Superset 150 gives good gap filling ability and high impact strength. It is suitable for bonding porous materials such as cork, pottery, leather fabrics etc.	Truloc Superset Gel is gel consistency ethyl based cyanoacrylate adhesive. Superset Gel is designed for the rapid bonding of high porosity substrates. Its rapid handling strength, high bond strength and gel consistency makes it ideal for vertical applications.
Pack Size	20g	20g	20g	20g	20g Tube
Download	Data Sheet	Data Sheet	Data Sheet	Data Sheet	Data Sheet

170-200-40100	Truloc Superset 41 V Low Viscosity Cyanoacrylate Adhesive20g	£7.55	In Stock
170-200-40200	Truloc Superset 45 Low Viscosity Cyanoacrylate Adhesive 20g	£7.55	Out of Stock	Estimated Back in Stock date: To be advised Notify me when this item is available
170-200-40300	Truloc Superset 53 Med Viscosity Cyanoacrylate Adhesive 20g	£7.55	In Stock
170-200-40400	Truloc Superset 150 High Viscosity Cyanoacrylate Adhesive20g	£7.55	In Stock
170-200-40500	Truloc Superset Gel Cyanoacrylate Adhesive 20g Tube	£9.25	Out of Stock	Estimated Back in Stock date: To be advised Notify me when this item is available

Truloc Super Epoxy & Quick Steel

NEW

Selection Guide	Super Epoxy	Quick Steel
Features	High quality two part fast curing epoxy. Excellent flexibility. Once cured, can be drilled sanded or painted. (Loctite Equivalent: Fastset)	High quality metal filled two part fast curing epoxy. Excellent flexibility. Once cured, can be drilled sanded or painted. (Loctite Equivalent: Metalset )
Pot Life	5-10 Minutes @ 25°C	5-10 Minutes @ 25°C
Cure Time	20-30 Minutes @ 25°C	20-30 Minutes @ 25°C
Pack Size	25ml Syringe	25ml Syringe
Download	Data Sheet	Data Sheet

170-200-50100	Truloc Super Epoxy General Purpose Fast Cure 25ml Syringe	£5.00	In Stock
170-200-50200	Truloc Quick Steel Metal Filled Fast Cure Epoxy 25ml Syringe	£5.00	In Stock