Product Added to Basket. View basket

4" Rotary Table and Accessories

4" Rotary Table and Accessories

The 4" Rotary Table comes complete with Chuck Backplate (for Chinese 80mm 3 jaw or 4 jaw chuck or 95mm ER25 or ER32 lathe collet chuck), 2 Hold-down Clamps and 4 T-Nuts.

Rotary Table Combi Set also includes Tailstock and Dividing Plate Set.

May be used horizontally or vertically.

Table Diameter 100mm
Length 140mm
Width (excl. h/wheel) 126mm
Height 73mm
Bore Taper MT2
T-Slot Width 8mm
Locating Key Width
(to fit milling table T-slot
when mounted vertically)
10mm
Centre Height
(Mounted Vertically)
68mm
Gear Ratio 1:72
Handwheel Divisions 2'
Min. Vernier reading 10"
Chuck Backplate Register 55mm
Dividing Plate Divisions 6 - 1080

Cletus Berkeley has written a useful guide on how to use a rotary table including 'basic' gear cutting.
Acrobat File Download the Guide
(1.7Mb).
(Adobe Acrobat Reader required)

130-030-00097 4" Rotary Table £212.83 Excl.VAT
£255.40 Inc.VAT
In
Stock
Qty:
Add to Basket
130-030-00099 Tailstock for 4" Rotary Table £52.13 Excl.VAT
£62.56 Inc.VAT
In
Stock
Qty:
Add to Basket
130-030-00098 Dividing Plate Set for 4" Rotary Table £48.65 Excl.VAT
£58.38 Inc.VAT
In
Stock
Qty:
Add to Basket
130-030-00100 4" Rotary Table Combi Set £302.31 Excl.VAT
£362.77 Inc.VAT
In
Stock
Qty:
Add to Basket
040-040-00100 Lathe Chuck Std. 3-Jaw Self Centring 80mm £61.55 Excl.VAT
£73.86 Inc.VAT
In
Stock
Qty:
Add to Basket
040-040-01000 Lathe Chuck 4 Jaw Self Centering 80mm £75.59 Excl.VAT
£90.71 Inc.VAT
In
Stock
Qty:
Add to Basket
040-040-00500 Lathe Chuck 4-Jaw Independent 80mm £65.16 Excl.VAT
£78.19 Inc.VAT
In
Stock
Qty:
Add to Basket
050-110-25610 ER25 Lathe Collet Chuck - 95mm Dia £39.29 Excl.VAT
£47.15 Inc.VAT
In
Stock
Qty:
Add to Basket
050-110-32600 ER32 Lathe Collet Chuck - 95mm Dia £38.78 Excl.VAT
£46.54 Inc.VAT
In
Stock
Qty:
Add to Basket