C3 Mini Lathe Bearing Change
13.
To compensate for the wider taper roller bearings it is necessary to make a new plastic spacer (approx. 0.105" wide) with keyway to fit the spindle between the timing wheel and gears.
C3 Mini Lathe Bearing Change |
||||||
|
13. |
To compensate for the wider taper roller bearings it is necessary to make a new plastic spacer (approx. 0.105" wide) with keyway to fit the spindle between the timing wheel and gears. |
|||||
|
||||||
|
||||||
|
||||||
| Trial fit the new spacer and adjust as required - the spindle speed timing disk must not foul the pickup and the gears must mesh correctly | ||||||
|
||||||
|
||||||