Product Added to Basket. View basket

ER40 Collets - Imperial

Imperial ER40 Collets

Code Nominal
Size
Clamping
Range (inch)
050-110-40310 1/8" 3/32"-1/8"
050-110-40320 3/16" 5/32"-3/16"
050-110-40330 1/4" 7/32"-1/4"
050-110-40340 3/8" 11/32"-3/8"
050-110-40350 1/2" 15/32"-1/2"
050-110-40360 5/8" 19/32"-5/8"
050-110-40370 3/4" 23/32"-3/4"
050-110-40380 1" 31/32"-1"

Runout: 0.008mm

Shortcuts
ER40 Metric Collets

Why you should use ER Collets

Unlike R8, 5C and Morse Taper collets, ER collets are slotted alternately from both ends and therefore compress onto the cutter along the whole length of the collet when tightened. This not only provides a better grip on the cutter shank but also allows some variation (typically 1mm) in shank sizes that may be used in a single collet (the ‘Clamping Range’). The smaller size collets are best used to hold cutters no more than 0.5mm below the nominal size.

Fitting and releasing an ER collet

How you should use ER Collets

Inspecting the inside of our ER collet nuts reveals an internal flange that has been machined eccentric to the main axis of the nut. This is not a machining error but is designed that way to lock onto the groove of the collet and aid its release from the chuck body.

For this feature to work properly, the collet must be mounted in the nut first before fitting the assembly into the chuck body. To mount the collet in the nut, insert it on an angle, turn slightly and push it into the nut until it clicks into place on the eccentric flange. The cutter may now be fitted and the assembly tightened hard into the chuck body.

To remove the cutter, slacken and undo the nut until resistance is felt. Then, using a collet wrench, further undo the nut until the collet is released from the chuck body. Removal of the collet from the nut is the reverse of the mounting procedure.

050-110-40310 ER40 Collet 1/8" RRP: £8.03 Inc.VAT
£5.47 Excl.VAT
£6.56 Inc.VAT
In
Stock
Qty:
050-110-40320 ER40 Collet 3/16" RRP: £6.99 Inc.VAT
£5.47 Excl.VAT
£6.56 Inc.VAT
In
Stock
Qty:
050-110-40330 ER40 Collet 1/4" RRP: £6.99 Inc.VAT
£5.47 Excl.VAT
£6.56 Inc.VAT
In
Stock
Qty:
050-110-40340 ER40 Collet 3/8" RRP: £6.99 Inc.VAT
£5.47 Excl.VAT
£6.56 Inc.VAT
In
Stock
Qty:
050-110-40350 ER40 Collet 1/2" RRP: £6.99 Inc.VAT
£5.47 Excl.VAT
£6.56 Inc.VAT
In
Stock
Qty:
050-110-40360 ER40 Collet 5/8" RRP: £6.99 Inc.VAT
£5.47 Excl.VAT
£6.56 Inc.VAT
In
Stock
Qty:
050-110-40370 ER40 Collet 3/4" RRP: £6.99 Inc.VAT
£5.47 Excl.VAT
£6.56 Inc.VAT
In
Stock
Qty:
050-110-40380 ER40 Collet 1" RRP: £6.99 Inc.VAT
£5.47 Excl.VAT
£6.56 Inc.VAT
In
Stock
Qty:
050-110-40400 ER40 8pc Collet Set - Imperial RRP: £49.11 Inc.VAT
£39.28 Excl.VAT
£47.14 Inc.VAT
In
Stock
Qty: