Product Added to Basket. View basket

6" Rotary Table with Stepper Motor

This is our standard 6in Rotary Table fitted with one of our 180Ncm Hybrid Stepper Motors.

  • The motor is wired with a robust 4 way XLR plug, ready to connect straight to the 4th axis socket of a KX1 or KX3 CNC machine, into a DivisionMaster Indexing Controller or connected to a bipolar stepper drive and used as a fourth axis on your CNC system.
    (Compatible XLR chassis socket: 160-030-00225)
  • The worm is fitted with Needle Roller Thrust Bearings to minimize backlash and may be adjusted for wear in the future.
  • Complete with Chuck Backplate for a Chinese 125mm 3 jaw or 4 jaw chuck or 125mm ER32 lathe collet chuck, 2 Hold-down Clamps and 4 T-Nuts
  • May be used horizontally or vertically.
Table Diameter 150mm
Length 178mm
Width (excl. h/wheel) 176mm
Height 90mm
Bore Taper MT2
T-Slot Width 10mm
Locating Key Width 8mm or 10mm
Centre Height (Mounted Vertically) 98mm
Gear Ratio 1:72
Handwheel Divisions N/A
Min. Vernier reading N/A
Chuck Backplate Register 95mm
130-030-00400 6" Rotary Table with Stepper Motor RRP: £487.50 Inc.VAT
£479.94 Excl.VAT
£575.93 Inc.VAT
Out of
Stock
Estimated Back in Stock date: To be advised
160-030-00225 *4 Way XLR Chassis Socket RRP: £4.31 Inc.VAT
£2.76 Excl.VAT
£3.31 Inc.VAT
In
Stock
Qty:
040-040-10300 Lathe Chuck Std. 3-Jaw S.C. 125mm £45.04 Excl.VAT
£54.05 Inc.VAT
In
Stock
Qty:
040-040-11050 Lathe Chuck 4 Jaw S.C. 125mm £59.74 Excl.VAT
£71.69 Inc.VAT
In
Stock
Qty:
050-110-32650 ER32 Lathe Collet Chuck - 125mm Dia £52.84 Excl.VAT
£63.41 Inc.VAT
In
Stock
Qty: